Diamond Point International (Europe) Ltd

Diamond Point International Ltd with head quarters in Rochester Kent UK and offices in Bangalore India provides a full range of military grade computers and peripherals. These range  from rugged PC/104 systems to complex VME DO-254 / 178B full avionics systems. Additionally DPI based on their extensive embedded computer knowledge offer a full bespoke design service helping many of the worlds leading defence contractors meet their embedded computer development goals on time and on budget.

Military Grade Computers

With 25 years experience DPI has also gained much knowledge in the use of solid state storage in military environments. This involves wide temperatures, high shock and vibration, purging and self destruct facilities. In recent years DPI has also introduced the highest performing storage systems currently available with latency figures in the low micro seconds and IO performance well in excess of 200,000 4K mixed read write IOP’s.

NO ITAR!!! Virtually all our products are non ITAR restricted this can provide massive savings in time and administration.

Conduction cooled Avionics & military grade VME & Compact PCI systems

VME, VM64, VPX, 3U & 6U Compact PCI, PMC, XMC, COTS Standards.

DPI with their partner Aitech Inc specialise in and are market leaders in, providing advanced-technology Commercially-available Off-The-Shelf (COTS) products, customised products, subsystems integration and logistics for our defence and aerospace customers. Applications for our products range from mission computers, target acquisition and closed-loop fire control, and mission-display subsystems for ground vehicles, to surface and subsurface naval platforms, to tactical and strategic fixed- and rotary-wing aircraft, and launch booster, low- to high-earth orbit, and deep-space vehicles. And all products are tightly coupled with our Earned Value Management and technical support services.

A market pioneer in the field of rugged computing for Defence applications, Aitech was the first company to market full MIL-SPEC VME computers based on Motorola's microprocessor families.

Power PC

Our CPU boards are based on PPC tm MPC7448, MPC7447A, Power PC 750FL (for low power less than 5 watts), these devices are supported by: Wind Rivers VxWorks tm, Green Hills Integrity tm, Linux Works tm and ALT Software tm.

We are one of the few companies that can provide boards and systems fully certifiable to DO 254 and 178B safety critical hardware and software standards; due to our previous qualification and our experience in this area we can save prospective new customers £100,000’s.

DPI & Aitech can also support Intel tm Core 2 Duo T7500/L7500 processors in 6U VME and 3U Compact PCI COTS Standards.

Peripheral I/O Boards

DPI & Aitech pride themselves in having the highest density IO of any COTS supplier, this saves our customers valuable slots in their Mil VME and cPCI systems and include A/D. D/A, Isolated Digital I/O Differential RS422

PMC Mezzanines

ARINC 429, Dual Redundant 1553B, CAN BUS 2.0B, Telemetry PCM, Serial RS232/422/485, Camera Link, MPEG 1,2,3 Encoders and Decoders, Servo I/O, ATI 9000 Radeon (M9) Dual headed Graphics & Video in 2D & 3D, Quad Fast Ethernet and various digital I/O options. Various STANAG 3350 standards are also supported.

PMC & XMC Solid State storage.

Complete PCI & SATA mass storage PMC/XMC solutions with up to 128 GByte NAND Flash Capacity, supporting over 120MB/sec write and 170 MB/sec read data transfer rates.

Subsystems Integration Opportunities

• Integration of  hardware, software and third party products into a complete subsystem solution
• Access to a broad variety of third party products
• Hardware and software customization to meet subsystem level needs
• Custom design of backplanes, power supplies, wire harnesses and metalwork
• Provision of commercial development systems that are 100% software compatible with rugged and military-qualified production units
• Subsystem and Systems level acceptance testing, including test code and full documentation
• Environmental qualification testing

Rugged Embedded PC104 computer systems.

Rugged Embedded Computer SystemWhen performance isn’t too demanding & price is very important DPI can build small cost effective fanless military grade systems using products from Kontron, Diamond Systems Inc, Tri-M and Connect Tech Inc providing self calibrating data acquisition systems with CAN, multiple RS232/422/485, Ethernet, USB, Opto Isolated digital IO interfaces

Wide temperature rugged and high performance MIL grade SSD’s (Solid State Drives)

DPI supply a wide range of high performance Industrial and Military grade SSD’s (Solid State Drives) up to 256GB capacity for SATA , SATA II, IDE/PATA with temperatures from - 40° C and +85° C up to  - 55° C and +125°C in 1.8”, 2.5” and 3.5” form factors. We can also apply conformal coating as required.  Max Read is up to 250MB/sec and max write up to 180MB /sec

CAN, Arinc 429, 1553, military STANAG based Video input and output interfaces.

DPI support all the main military interfaces and can work with customers trying to encode and decode aging STANAG interfaces and mil type aspect ratios

Bespoke Military Systems.

DPI as a Kontron authorised embedded computing design house has designed and manufaBespoke Military Designctured and shipped 1000’s of bespoke systems to meet the very exact requirements of their military customers. This service includes embedded processor design, IO, communications, cooling strategy and chassis design. DPI is audited to ISO 9001 Quality Standard for design manufacture production stocking and distribution. Our engineering department understand military contractors needs as we come from that background DPI can provide the spare capacity to take on the standard parts of a requirement  leaving our customers engineers free to develop the more specialised aspect of a given project.
 

Categories: Computers, Computers, COTS Board, Rugged Equipment, Storage Solutions
Home | About Us | Copyright © 2010 Westlake Publications Ltd. All Rights Reserved.